pressure switch
1.pressure switch(XYK-117)
1.Automatic Reset Pressure switch designed. 2.Wide range of pressure settings & meet a board variety of application. 3.Used: Pressure controlling of Air, Water, Internal wiring of electric refrigerating equipment or room cooler units or remote outdoor condensing units for domestic cooling systems. 4.Typical Applications: safety controls / air conditioning / refrigeration. 5.All stainless steel XYK-117 Can be used in the corrosived application Wetted part Stainless Steel All stainless steel Specification XYK.zip Model XYK-117 Media Air, Water, motor oils, transmission oils, Hydrocarbon Media, Refrigeration fluid Max Operating Pressure 25 Bar for actuation up to 10 Bar 35 Bar for actuation from 10-20 Bar Proof Pressure 35 Bar for actuation up to 10 Bar 55 Bar for actuation from 10-20 Bar Operating Temperature Range -30ꇦ to ~ 80ꇦ Switch Type Direct action, blade contact, SPST NC, NO Electric Rating 120/240VAC, 375VA 24VAC/DC, 2A Dielectric StrengthA 750 Vrms across open contacts 1550 Vrms terminals to fitting Terminals 1/4"blade Life at Related Load 100,000 cycles Connection 1/8NPT, G1/8", 1/4NPT, G1/4" Options various connector and thread sizes
Category:-> Pressure Switch
Tags:digital pressure gauges switches air compressor pressure switch arrow switch pressure switches for air compressor atv switch
2.Differential Pressure Switch(SC-08)
SC-08 Differential pressure switch is capable to sense tiny pressure change and widely used to control the flue of aerator, to monitor fan and air conditioner. It is also suitable for over heating protection and frost protection in industrial cooling system. Due to its outstanding design, the setpoint can be adjust visually. Specification SC-08.zip Model SC-08 Media Air, non-combustible and non-aggressive gasses Max Operating Pressure 5 kPa Mounting position Diaphragm in any vertical plane Degree of protection IP54 (with cover) Operating Temperature -40? C to 85? C Contact Arrangement SPST or SPDT Electrical Rating Resistance: Initial: <400 milliohms; 1.5A (0.4A) @ 250V Terminals 6.4 mm(0.25") copper alloy Connection 6.0mm Dia. for tube connection Model Pressure Range Differential Tolerance SC-08A 20 ~ 200 Pa 10 Pa +/-15% SC-08B 30 ~300 Pa 10 Pa +/-15% SC-08C 40 ~400 Pa 20 Pa +/-15% SC-08D 50 ~ 500 Pa 20 Pa +/-15% SC-08E 200 ~ 1000 Pa 100 Pa +/-15% SC-08F 500 ~ 2500 Pa 150 Pa +/-15% Conversion: 1"W.C.= 1 inch/H2O=249Pa 1mbar=100Pa
Category:-> Differential Pressure Switch
3.pressure switch(XYK-114)
1.Automatic Reset Pressure switch designed. 2.Wide range of pressure settings & meet a board variety of application. 3.Used: Pressure controlling of Air, Water, Internal wiring of electric refrigerating equipment or room cooler units or remote outdoor condensing units for domestic cooling systems. 4.Typical Applications: safety controls / air conditioning / refrigeration. 5.All stainless steel XYK-117 Can be used in the corrosived application Specification XYK.zip Model XYK-114 Media Air, Water, motor oils, transmission oils, Hydrocarbon Media, Refrigeration fluid Max Operating Pressure 25 Bar for actuation up to 10 Bar 35 Bar for actuation from 10-20 Bar Proof Pressure 35 Bar for actuation up to 10 Bar 55 Bar for actuation from 10-20 Bar Operating Temperature Range -30ꇦ to ~ 80ꇦ Switch Type Direct action, blade contact, SPST NC, NO Electric Rating 120/240VAC, 375VA 24VAC/DC, 2A Dielectric StrengthA 750 Vrms across open contacts 1550 Vrms terminals to fitting Wire wire is optional Life at Related Load 100,000 cycles Connection 1/8NPT, G1/8", 1/4NPT, G1/4" Options various connector and thread sizes
Category:-> Pressure Switch
Tags:digital pressure gauges switches air compressor pressure switch arrow switch pressure switches for air compressor atv switch
4.Pressure switch(SC-02 )
SC-02 Pressure Switches are widely used for the pressure control,it can control the pressure system and give a ON/OFF signal to alarm or control electric units with almost no hysteresis. Specification Pressure switch-SC-02.zip Model SC-02L SC-02H Pressure Range 1.45-14.5psi 14.5-145psi Electric Rating 500mA/250VAC Proof Pressure 400psi Temperature -20ꇦ ~+90ꇦ Connection G1/8 Male Contact Type SPST NO or NC Differential <5 % of set point Terminals 1/4ꆱ blade Operate Life 100000 Protect IP5 4 ( with cover)
Category:-> Pressure Switch
Tags:auto oil pressure switch car oil pressure switch low pressure switch pressure sensor air pressure switch
5.Gas Pressure Switch(SC-09)
SC-09 Gas Pressure Switch is used to detect the pressure of city gas,natural gas,LPG and air etc. When the gas pressure changes,the diaphragm of the pressure receiving part detects it and operates the SPDT switch to ON/OFF control of the external electrical circuit. These switches are widely used to detect the upper limit or lower limit pressure of gas or air to be supplied to a gas burner. Model Operation pressure range (mbar) Differential (mbar) Max. Working Pressure(mbar) SC-09A 2..12 <2 300 SC-09B 10..50 <10 300 SC-09C 30..140 <20 300
Category:-> Differential Pressure Switch
Tags:Gas Pressure Switch Pressure Switch Differential Pressure switch
.jpg)
6.Air Switch(30mbar-300mbar)(SC-40)
SC-40 can be used together with SC-41 air button (also called as Actuator) for remote control purpose. It is widely used in food waste disposer, pumps for swimming pools and spas, hot tubs, sanitary equipment, out door machines, medical equipment etc. As a remote control switch, it is small enough to fix in the control box of the engine. Used as a remote control, the air switch has two actions: 1) Momentary action: when the air button is pushed, the air switch is actuated. When air button is released, the air switch will also be released. This is the way the basic pressure switches are working. 2) Alternate action (also referred to as latching or bistable): the first pushing on air button actuates the air switch, and the air switch keep actuating when air button is released. A second push on the air button will release the air switch. Model SC-40 Media Air or other non hazardous gas, water Operating Pressure Range 20 mbar to 1000 mbar Proof Pressure 50 PSI Operating Temperature Range -10~85 Contact Arrangement SPST or SPDT Electric Rating 1/2HP 250V, for long distance remote control; 2HP 250V, for high rating application; Other rating can be available on request Terminals 6.35 or 4.88 mm male Q.C. Connection 4mm OD tube,1/4 NPT male thread, 1/8 NPT male thread
Category:-> Air Switch and acutator
Tags:whirlpool air switch air compressor pressure switch spdt air switch pressure switch pressure control switch
7.Pressure Switch(SC-60)
SC-60 pressure switches are used for regulating, monitoring and alarm systems in industrial applications. The SC-06 series are suitable for gaseous media and air. They are fitted with a single-pole switch changeover (SPDT), and can control single-phase ac motors of up to 2 kW directly. Media Refrigerant, Air, Water, Oil Media Temperature -10 C to 120 C Connection M12X1.25, 7/16-20UNF other connection is available on request Contact Arrangement SPDT Electrical Rating: Non-Inductive: 20A @125VAC, 10A@ 250 VAC Inductive: FLA: 15A @ 125VAC, 8A @250VAC LRA: 72A Model Specification Model Adjustable range (Bar) Differential (Bar) Factory setting (Bar) Max working pressure (Bar) Min. Max. Min. Max. OFF ON SC-6003 -0.7 3 0.2 1.5 2 1 16.5 SC-6006 -0.7 6 0.6 4 3 2 16.5 SC-6006M -0.7 6 Reset Differential </=1 3 Manual Reset 16.5 SC-6010 1 10 1 3 6 5 16.5 SC-6016 5 16 1 4 10 8 35 SC-6020 5 24 2 5 16 13 35 SC-6030D 5 30 5 10 20 15 35 SC-6030 8 30 Fixed at 3 to 5 20 15~17 35 SC-6030M 8 30 Reset Differential </=4 20 Manual Reset 35
Category:-> Pressure Switch
8.Pressure Switch(SC-61)
SC-61 differential switches are used in general industrial and marine sectors. The SC-61 differential pressure switches series consist of a variety of switches for applications in which safety or economical consequences are critical factors.
Category:-> Pressure Switch
9.Pressure Switch(SC-62)
SC-62 dual pressure switch is designed for useas a pump guard to control and protect supply water pumps. It combines the functions of a pressure switch and a flow monitoring device. The lefthand pressure bellows control the pump pressure. The righthand bellows cut out the pump if the suction pressure is too low. In this way the pump is protected from running dry and consequent bearing damage
Category:-> Pressure Switch
10.Differential Pressure Switch (SC-07)
The type SC-07 pressure switch is used as a Differential pressure switchin ventilation ducts for the control of filters and fans, and inprimary and secondary control systems for the control of airdampers. The SC-07 pressure switches are alsoideally suited to protect heating coils from overheating andfor monitoring industrial air cooling circuits. Medium: air andnon-corrosive gases. Model SC-07 Media Air,non-combustible and non-aggressive gases Pressure Range 20-400Pa(Custom) Differential Range 8-50Pa(Custom) Max Operating Pressure 1.5kPa Mounting Position Diaphragm in any vertical Plane Operating Temperature -25ꇦ to +85ꇦ Contact Arrangement SPDT Electrical Rating Resisitance: initaial:?5 0milliohms Current: 1 A( 0 . 5 A) / 2 5 0 V Termimnals 6.4mm or 4.8 blade Connection OD 6.0mm for tube connection
Category:-> Differential Pressure Switch
Tel:86-577-62706263,86-15158479670
Fax:86-577-56848029
Email:sale@cnsencon.com
MSN: cnsencon@hotmail.com
SKYPE: cnsencon