low pressure switch
1.Pressure switch(SC-02 )
SC-02 Pressure Switches are widely used for the pressure control,it can control the pressure system and give a ON/OFF signal to alarm or control electric units with almost no hysteresis. Specification Pressure switch-SC-02.zip Model SC-02L SC-02H Pressure Range 1.45-14.5psi 14.5-145psi Electric Rating 500mA/250VAC Proof Pressure 400psi Temperature -20ꇦ ~+90ꇦ Connection G1/8 Male Contact Type SPST NO or NC Differential <5 % of set point Terminals 1/4ꆱ blade Operate Life 100000 Protect IP5 4 ( with cover)
Category:-> Pressure Switch
Tags:auto oil pressure switch car oil pressure switch low pressure switch pressure sensor air pressure switch
2.Differential Pressure Switche(SC-03)
SC-03 can be is applied to detection positive or negative pressure. It can be used as a gauge or differential pressure switch with almost no hysteresis. If 2 switch points are required, 2 pressure switches with different calibrations should be employed. The method of fixing the tab terminals to the switch body does not allow for absolute air sealing. The switch is therefore not recommended for applications where static vacuum has to be maintained. However, special models with additional pressure spring which allow for the vacuum to be connected to the pressure inlet side are available on request.
Category:-> Differential Pressure Switch
Tags:auto oil pressure switch car oil pressure switch low pressure switch pressure sensor air pressure switch
3.Differential Pressure Switches (SC-05)
SC-05 Pressure switches offer pressure, vacuum and differential models capable of sensing very low setpoints, and swit ching current up to 5A resistive. Designed for use in the HVAC industry, where reliable air proving is critical to both performance and customer safety, the SC-05 is a favorite with leading manufacturers of gas-fired warm air furnaces and water heaters
Category:-> Differential Pressure Switch
Tags:auto oil pressure switch car oil pressure switch low pressure switch pressure sensor air pressure switch
5.pressure switch(SC-01)
The SC-01 pressure switches are used to regulate the tank pressure between two preset values on 3 phase electrically driven air compressors.They are available with an unloader valve, which prevents compres-sors from starting under load, and it is available with an On-Off knob for manual cut off the compressor
Category:-> Pressure Switch
Tags:auto oil pressure switch car oil pressure switch low pressure switch pressure sensor air pressure switch
Tel:86-577-62706263,86-15158479670
Fax:86-577-56848029
Email:sale@cnsencon.com
MSN: cnsencon@hotmail.com
SKYPE: cnsencon